Logo
Sitemap
NEWS

29 August 2017  

The first training webinar was held at the Poltava Automobile Units Plant

After the successful debut of the first training seminar on the basis of the Poltava Automobile Units Plant for Ukrainian partners of our enterprise, in August, not stopping at the achieved, the first webinar for dealers was organized and successfully held.

Read full article >>

01 August 2017  

video about one of new product of production - air dryer 11.3536008-10 and its modifications

The development of a new product is a painstaking and time-consuming process. But entering the market and presenting the product to future consumers is no less difficult. Here more than ever it is important to convey much useful information in a convenient form for each. Therefore, Poltava Automobile Units Plant is proud to present a video about the new product - air dryer 11.3536008-10 and its modifications. We hope that the information presented will be useful and relevant to a wide range of those who are interested in the new products of the automotive market, as well as our customers, both those we are working with now, and those who will make a choice in favor of our products in the near future.

Read full article >>

10 July 2017  

At Poltava Automobile Unit Plant was held the first training seminar

On Saturday, July 8 on the Poltava Automobile Unit Plant was the first training seminar of the Ukrainian partners of our company, who arrived from many regions of the country - Kiev, Dnepropetrovsk, Zaporozhye, and others.

Read full article >>

04 July 2017  

The results of the work of PJSC «PAUP» for the first half of 2017.

According to the results of work in January-June of 2017, PJSC «Poltava Automobile Aggregate Plant» increased the sales of products in comparison with the same period of the previous year - over 74.7 million hryvnia (growth rate 36.8%), including brake equipment - over 59.5 Million hryvnia (growth rate 35%), consumer goods - more than 13.2 million hryvnia (growth rate 73%).

Read full article >>

06 June 2017  

Report on participation in the 25th International specialized exhibition for the car service and after-sales service market of vehicles SIA-AvtoTehServis`2017

From May 31 to June 3, Kiev hosted the 25th International Specialized Exhibition SIA-AutoTechService`0101, which takes place on the territory of the International Exhibition Center at the same time as the 19th International Specialized Exhibition "Refueling Complex-2010".

Read full article >>

28 March 2017  

Employees of the Poltava Automobile Unit Plant took part in the intellectual competition

On March 23, a team of experts from the Poltava Automobile Unit Plant took part in the Spring Cup of the Brain Ring Game Series «Intellectual Capital of the City» at the invitation of the Open Public Platform «New Poltava».

Read full article >>

27 March 2017  

Visit of the Swedish delegation to the PJSC «PAAZ»

On March 22, the PJSC «PAAZ» plant met a delegation of its Swedish colleagues from the company Swedish Lorry Parts AB, headed by the strategic sourcing manager of the company Ethan Emmanuel, who arrived to discuss the conditions and prospects for further cooperation in 2017-2018.

Read full article >>

21 February 2017  

«PAUP» continues to work successfully in 2017

Poltava Automobile Units Plant entered in 2017 as one of the most successful plant of the machine-building industry both in the Poltava region and in Ukraine as a whole.

Read full article >>

17 January 2017  

Results of PJSC «PAUP» for 2016

According to the results of 12 months 2016 PJSC «Poltava Automobile Unit Plant» increased the volume of sales compared to the same period last year - more than 143 million UAH (8.5% growth rate), including brake equipment - more than 114 million UAH (growth rate 3.8%), consumer goods - more than 23 million UAH (growth rate 39%).

Read full article >>

06 December 2016  

About the benefits of the electro-pneumatic valve (EPV) and the blocks of electro-pneumatic valves (BEPV) production of PJSC «PAUP»

Appointment

Read full article >>

21 November 2016  

Video about the new product - Pneumohydraulic amplifier (air-hydraulic amplifier) 14.1609010

Read full article >>

17 October 2016  

The switch further transmission (splitter) for trucks 14.1703800 / -10

Poltava Automobile Unit Plant represents one of the new developments - additional switch box 14.1703800 / -10 gear.

Read full article >>

10 October 2016  

Poltava Automobile Unit Plant received ISO / TS 16949: 2009 certification

From 20 to 23 June 2016 Poltava Automobile Unit Plant held an international audit of all processes PJSC "PAAZ" for compliance with ISO / TS 16949: 2009

Read full article >>

13 September 2016  

Brake chamber type 24 (11.3519510/-10)

Poltava Automobile Unit Plant is one of the new developments - brake chamber type 24 (11.3519510 / -10) (see additional materials.).

Read full article >>

31 August 2016  

Poltava Automobile Unit Plant - Industry Leader in 2016

According to the official data of the National Business Rating, Poltava Automobile Unit Plant won a gold rating among Ukrainian companies in the category «Social contribution to enterprise», as well as gold rating among enterprises of Poltava region in the «Profit on share capital». Based on the results of summarizing Poltava Automobile Unit Plant won, according to data provided by the state authorities of Ukraine statistics, the title «Industry Leader 2016». Representatives of the management of the plant were awarded internationally recognized official certificate and a medal, confirming the high rank of one of the leaders of the country's economy.

Read full article >>

15 August 2016  

Product quality - a priority in the work of Poltava Automobile Unit Plant

PJSC «Poltava Automobile Unit Plant», founded in 1945, today is a high-tech, modern machine-building enterprise for the production of complex brake systems for heavy vehicles.

Read full article >>

15 August 2016  

Work on construction optimization pneumohydraulic amplifier

Pneumohydraulic amplifier 14.1609010 / -10 / -20 / -30 / -40 is designed to reduce the force applied by the driver to turn off the clutch pedal at the expense of the use of compressed air energy in order to reduce driver fatigue by improving the ergonomic qualities of the car.

Read full article >>

10 June 2016  

Upgrading production base

According to the program of measures for energy savings for 2016, adopted at Poltava Automobile Unit Plant, carried out step by step set of works on reconstruction of the compressed air system in the enterprise.

Read full article >>

08 June 2016  

The visit of adviser of the trade and economic department of the Republic of Belarus Embassy in Ukraine to the PJSC «PAAZ»

June 8, 2016 adviser of the trade and economic department of the Republic of Belarus Embassy in Ukraine Olga Kovaleva made a working visit to Poltava Automobile Unit Plant accompanied by the Dmitry Orlov, Deputy Director of Department of Economic Development of Poltava Regional State Administration and president of Poltava Chamber of Commerce and Industry, Vladimir Oleynik.

Read full article >>

30 May 2016  

Report on the participation in the 24th International Specialized Exhibition for Car and market automotive aftermarket SIA- AutoTechService 2016

From 25 to 27 May in Kiev took place the 24th International Specialized Exhibition SIA-AutoTechService 2016 takes place at the International Exhibition Centre simultaneously with the 18th International Specialized Exhibition «Motor Fueling Complex 2016».

Read full article >>

10 May 2016  

Poltava Automobile Unit Plant develops electronic tenders purchases.

Since 2016 the company has concluded a mutually beneficial agreement with the electronic trading platform SmartTender.

Read full article >>

29 March 2016  

Poltava Automobile Unit Plant is developing sales of a new nomenclature.

Poltava Automobile Unit Plant, which is one of the traditional manufacturer of pneumatic brake systems for heavy trucks, has always made every effort to best suit their products to the needs and wishes of its customers, partners, and client.

Read full article >>

29 February 2016  

PAAZ continues work successfully in 2016

Poltava Automobile Unit Plant entered in 2016 as one of the most successful enterprises the engineering industry as the Poltava region and Ukraine in general.

Read full article >>

02 February 2016  

KrAZ Tests Hydraulic Power Steering System produced by Poltava Automobyle Unit Plant

To follow the strategy aimed at import substitution and reduce the cost of products KrAZ utilizes new units and parts made by Ukrainian manufacturers. Thus, Test Centre of “AutoKrAZ” started testing of the 14.1609010/-10/-20/-30/-40 flange-mounted power steering system made by domestic producer. This hydraulic component was designed in accordance with specification of Kremenchug Automobile Plant and Poltava Brake Components Plant, long-term strategic partner, mastered its production at the end of 2015.

Read full article >>

19 January 2016  

PAAZ work summary for the year 2015

According to the results of 12 months 2015 PJSC «Poltava Automobile Unit Plant» increased the volume of sales compared to the same period of last year - over 131 million hryvnia (25.6% growth rate), including brake equipment - over 110 million hryvnia (growth rate 22.6%), consumer goods - over 16 million hryvnia (growth rate 34%).

Read full article >>

15 December 2015  

Awarding of the honorary diploma for high quality products

One of the most significant awards, which were received in the course of events on the eve of the seventy-year anniversary of Poltava Automobile Unit Plant, can be called the honorary diploma, which was handed by the representatives of Chamber of Commerce of Ukraine.

Read full article >>

01 December 2015  

Automobile Unit Plant celebrates 70-year anniversary!

On the 1 of December 2015 Poltava Automobile Unit Plant celebrates its own special holiday - the Day of Foundation of Enterprise.

Read full article >>

01 December 2015  

Clutch Servo 14.1609010 / -10 / -20 / -30 / -40

Poltava Automobile Unit Plant represents one of the new developments - Clutch Servo 14.1609010 / -10 / -20 / -30 / -40

Read full article >>

21 October 2015  

The groups of Poltava Automobile Unit Plant have been created in social networks VKONTAKTE and FACEBOOK

Since October of current year the groups of Poltava Automobile Unit Plant have been created in social networks VKONTAKTE and FACEBOOK. The main purpose of their creation - is a constructive dialogue with our partners, customers, and simpl people who are interested in our products and enterprise, and who have something to ask and discuss with the representatives of the plant. These groups are open and any person may join these groops to create a topic that interests him and discuss it. We will gladly support a dialogue on any topic concerning our products and enterprise. And also we will be thankful for any question, comment or remark. We hope very much that this project will help us to become better with your help, more flexibly responding to the questions that are really important for you.

Read full article >>

12 October 2015  

The results of the National Business Rating

According to the information of OJSC «Statinformconsulting», based on data from the State Statistics Committee of Ukraine, Poltava Automobile Unit Plant ranked the third place (among enterprises of Poltava region), and the sixteenth place (among enterprises of Ukraine) by the total mark in the National Business Rating in the branch «Production of units, parts and accessories for motor vehicles».

Read full article >>

22 September 2015  

Four-circuit Protection Valve 14.3515410-20

Poltava Automobile Unit Plant represents one of the new developments - Four-circuit Protection Valve 14.3515410-20(see additional materials).

Read full article >>

01 September 2015  

Dear partners, customers and colleagues!

From the 1-st of September 2015 PJSC «Poltava Automobile Unit Plant» in a short time all the telephone numbers will be disconnected and replaced by single multi-channel numbers – phone: +38 (0532) 51-92-00 and fax: +38 (0532) 51-92-01.

Read full article >>

20 July 2015  

Pipelines Twisted 11.3506010/11

Poltava Automobile Unit Plant represents one of the new developments - Pipelines Twisted 11.3506010/11 (see additional materials).

Read full article >>

06 July 2015  

Results of PJSC «PAAZ» for the first half of 2015.

Based on results of January-June 2015 PJSC «Poltava Automobile Unit Plant» has increased the volume of realized output. It can be compared with the same period of last year – more than 54 million UAH (the growth rate is 31.1%), including brake systems - more than 48 million UAH (the growth rate is 29.3%), consumer goods – more than 4 million UAH (the growth rate is 23%).

Read full article >>

02 June 2015  

Power Pneumohydraulic 121.1609010 / -10.

Poltava Automobile Unit Plant is one of the new developments - Power Pneumohydraulic 121.1609010 / -10 (cm. Additional materials).

Read full article >>

23 May 2015  

Extend the application scope of the conditional number of devices on the drive train of the rolling stock.

As part conducted in accordance with established procedure works to expand the scope of the previously assigned contingent numbers «1471» Poltava Automobile Unit Plant got the right to end stigma of cranes and the manufacture of ball valves, in addition to connecting sleeves complete and tees. Information on the conditional extension number «1471» is also included in the interstate branch qualifier for Rail Transport of the Commonwealth of Independent States uchasnits, Georgia, Lithuania, Latvia and Estonia «FAS 1001 12 Contingent codes enterprises.»

Read full article >>

23 April 2015  

Forgery!

Dear customers! Poltava Automobile Unit Plant produces special food grinder of aluminum using high technologies and attracting the best talent on the basis of almost half a century of experience in production.

Read full article >>

17 February 2015  

PAAZ continues to operate successfully in 2015

Poltava Automobile Unit Plant joined in 2015 as one of the most successful enterprises of machine-building industries Poltava region and Ukraine as a whole.

Read full article >>

20 January 2015  

The new equipment plan is approved for 2015

To satisfy customers needs and wishes, as well as to keep up with modern trends of the development market of brake equipments, Poltava Automobile Unit Plant going to bring to the preparation of the production and the CIS market the new generation equipment in 2015. The complex of work is also arranged for modernisation to separate vehicles that presently is highly sought by the bulk and perfection of consumer and technical properties that will allow more fully to satisfy the queries of products for PAAZ consumers .

Read full article >>

20 January 2015  

The plan of new technology for 2015

In an effort to maximize the meet the needs and wishes of its customers, as well as to keep up with modern trends of the market development of brake equipment Poltava Automobile Unit Plant is planning in 2015 to bring the preparation and production of the CIS market, upon completion of design and manufacturing processes, a number of new generation . Also planned complex of works on modernization of the individual units, which are currently the bulk of consumer demand and improved consumer and technical properties of which will better meet the demands of consumers of products of PJSC «PAAZ.»

Read full article >>

14 January 2015  

The national economic rankings results

The Poltava Automobile Unit Plant took tenth place, according to the total score, in the mechanical engineering field, as well as fourth place in consumer goods. This results was shown according to the economic rating of «Exporter of the Year» and «Importer of the Year», based on the data from State Statistics of Ukraine. Estimation of activity enterprise according to the following criteria: total amount of the production export, the growth dynamics, the number of the commodity items, the number of counterparties.

Read full article >>

14 December 2014  

Valve protection triple 14.3515210

This product is intended for the separation of a compressed air supply line into three circuits, for automatic shut-off circuit in the event of damage or loss of sealing and to maintain a certain air pressure in the intact circuits, to maintain a certain air pressure in all circuits in case of damage or disturbance tightness of the supply line.

Read full article >>

09 December 2014  

Triple Protective Valve 14.3515210

Poltava Automobile Unit Plant represents one of the new developments - Triple Protective Valve 14.3515210 (see. additional materials).

Read full article >>

13 November 2014  

13 November - World Quality Day

Today, on the 13-th of November, is the World Quality Day. For the first time ever it was celebrated in 1989. Since then it has become a tradition to congratulate the employees of the appropriate services on the professional holiday in the second Thursday of November.



Read full article >>

04 November 2014  

The report on participation in the International Specialized Exhibition Premier Expo (TIR2014)

During the 27 – 30 of October the International specialized exhibition Premier Expo (TIR2014) took place in Kiev. It was held at the International Exhibition Centre at the same time with the International specialized exhibition «InterStorage.»

Read full article >>

25 September 2014  

PAAZ successfully passed international certification audit

The Poltava Automobile Unit Plant has successfully passed the recertification audit of QMS ISO/TS 16949:2009 (certificate of registration ¹ 12 111 46564 IATF 0173324) validity for three years, issued by the certification company TUV SUD Management ServiceGmbH.

Read full article >>

15 September 2014  

Poltava Automobile Unit Plant is the exporter of the year

According to the results of the economic rating of «Exporter of the Year» and «Importer of the Year», based on the data of the State Statistics of Ukraine, Poltava Automobile Unit Plant took second place (gold) by the total ball, in the field of mechanical engineering, in the category – «Machinery, equipment and mechanical devices and thereof parts». Estimation of the enterprise activity made according to the following criteria: total export/import, the dynamics of growth compared to previous years, diversification (the number of headings) and the number of counterparties.

Read full article >>

03 June 2014  

Results of PJSC «PAAZ» for 5 months of 2014.

Based on results of January-May 2014 PJSC «Poltava Automobile Unit Plant» has retained consistently high sales volume. It can be compared with the same period last year - about 32 million UAH, including brake systems - more than 29 million UAH, consumer goods - about 2 million UAH.

Read full article >>

03 June 2014  

The forum of Poltava Automobile Unit Plant started

Since the beginning of June: Poltava Automobile Unit Plant put into action the forum. The main purpose of its creation - constructive dialogue with our partners, customers, and just people who are interested in our products and company, and who have something to ask and discuss with representatives of the plant.

Read full article >>

13 May 2014  

Awarding of the certificate of gratitude from The State Service of Mining Supervision and Industrial Safety

The constant growth of production and economic indicators, active innovation policy of leadership and implementation of measures to upgrade production base, ensuring maximum safety of employees, and also efficient operation in the market of PJSC «Poltava Automobile Unit Plant» found their recognition and won high praise from representatives of the State Service of Mining Supervision and Industrial Safety of Ukraine in Poltava region.

Read full article >>

24 April 2014  

Results of the national business-rating

According to the information of the OJSC «Statinformconsulting», based on the data of State statistics committee of Ukraine, Poltava Automobile Unit Plant took third place (among the enterprises of Poltava region), and the twelfth place (among Ukrainian enterprises) by the total ball at the National business – rating industry «Production units, parts and accessories for motor vehicles».

This rating show the actual appeal of the enterprise to investors, gives information to potential partners on the status of the enterprise.

Read full article >>

18 March 2014  

The mating part of electrical connector for the Air Dryer 11.3536190

Poltava Automobile Unit Plant presents one of the new developments – the complementary part for the Air Dryer 11.3536008/-10/-50, 11.3536006/-30 – the mating part of electrical connector for the Air Dryer 11.3536190. The manufacturer is PJSC «Poltava Automobile Unit Plant» (see additional materials).

Read full article >>

28 January 2014  

The plan for a new equipment for 2014 approved

In order to satisfy the demands and wishes of customers, as well as to keep up with modern market trends of brake equipment, Poltava Automobile Unit Plant in 2014 plans to bring to the pre-production and the CIS market, upon completion of design and manufacturing processes, a number of new generation.Also planned range of works on upgrading individual units, which are currently the bulk of consumer demand and improving consumer and technical properties of which will better meet the needs of consumers of products of PJSC «PAUP».

Read full article >>

14 January 2014  

Results of national economic ratings

According to the results of the economic ratings «Exporter of the Year» and «Importer of the Year», based on the data of the The State Assembly of Statistics of Ukraine, Poltava Automobile Unit Plant is on the second place, according to the total score, in the field of engineering, in the nomination - «Ground transport facilities, except railway or tramway rolling stock, their parts and equipment».

Read full article >>

02 December 2013  

Conventional number for apparatus for railway rolling stock drivereceived

By the decision number DI-1/595 of the Directorate of The Council for Rail Transport of the member states- Independent States, Georgia, Lithuania, Latvia and Estonia republics of 11.26.13, and also in accordance with the directive of Main Department of Car Facilities Ukrzaliznytsia was decided to assign PJSC «Poltava Automobile Unit plant» (Ukraine) conventional number 1471 for stamping connecting hoses R17B (assembly) and T 573 and 573P in manufacturing.

Read full article >>

11 November 2013  

Poltava Automobile Unit Plant received the certificate ISO/TS 16949:2009

From 21 to 26 July 2013 at Poltava Automobile Unit Plant the second stage of the audit of ISO/TS 16949:2009 (audit all processes PJSC «PAUP») took place.

Read full article >>

06 November 2013  

Visit of a delegation of representatives of Knorr Bremese at PJSC «PAUP»

November 5 Poltava Automobile Unit Plant received a delegation of its German and Hungarian colleagues - representatives of the company Knorr Bremese, headed by managing director Istvan Lepseni that arrived to discuss the conditions and prospects of cooperation in 2014.

Read full article >>

04 November 2013  

Global automotive standard - a pledge quality production

Following the trends of the European automotive industry , PJSC «PAUP» constantly updating the product range. Pneumodevices Company fully comply with the requirements of Regulation number 13 UNECE to pneumatic devices PBX.

Read full article >>

13 August 2013  

Poltava Automobile Unit Plant has successfully completed the second stage of the certification audit ISO/TS 16949:2009

From 21 to 26 July 2013 at Poltava Automobile Unit Plant was the second stage of the audit of ISO/TS 16949:2009 - audit all processes PJSC «PAUP».

Read full article >>

25 July 2013  

New perspective products

New modifications of brake valve 11.3537510, 11.3537510-10, 11.3537510-20, 11.3537510-30 that have successfully passed the test procedures at GAZ Group - JSC «AZ «Ural» and «Likinsk Bus Plant» Ltd now mastered and mass-produced.

Read full article >>

28 May 2013  

The visit of the Serbian delegation at PJSC «PAUP»

On May 27 the Serbian perspective partners PRVA PETOLETKA PROMET AD visited Poltava Automobile Unit Plant, in order to discuss the conditions and prospects of further cooperation in 2013-2014.

Read full article >>

23 May 2013  

Chinese’ delegation visited PJSC PAAZ

At May 22nd a delegation of the perspective partners from China – representatives of the Zhejiang VIE Science&Technology Co. Ltd. headed by the Managing Director Carl Yao has visited PAAZ to negotiate terms and conditions of future cooperation in 2013-2014.

Read full article >>

21 March 2013  

Poltava Automobile Unit Plant has started the second step of the preparation for certification audit ISO/TS 16949:2009

The first stage of the certification audit ISO/TS 16949:2009 “Checking and assessment of the documentation Management System” was held at Poltava automobile unit plant on the 19th of March, 2013.

Read full article >>

18 March 2013  

Installation of new equipment

Continuing renovation of production base, particularly rolling-stock brake gear devices implementation, new milling machine was provided — Style BT 1000 (Netherlands), total value is more than 1,2 million hryvnia (payback period is 3-5 years). This lathe was bought with a purpose to machineStop Valve 4300PA and Hose Connection P17B.

Read full article >>

13 February 2013  

ÃVÀÐÄÈß. The Most Successful Top-Managers Rating results

High level of a management processes organization, competent work team, effective objects stating, reasonable and well-planned working process at the Poltava Automobile Unit Plant under unfavourable market conditions are reflected in the Ukrainian rating program «ÃVÀÐÄÈß. The Most Successful Top-Managers Rating results»

Read full article >>

11 February 2013  

Rolling-stock brake gear devices interagency Commission

Within the production diversification program, particularly a rolling-stock brake gear devices development, Poltava Automobile Unit Plant successfully passed the T-bends 573 and 573P interagency Commission in January, 2013.

Read full article >>

06 February 2013  

Installation of new equipment

Continuing renovation of production base, owing to production and sale growth for the needs of Poltava Automobile Unit Plant, new equipment was provided — CNC lathe Style 350 (Netherlands), total value is more than 1,2 million hryvnia (payback period is 3-5 years). This lathe was bought with a purpose to manufacture a tip of the connecting sleeve.

Read full article >>

22 December 2012  

Poltava Automobile Unit Plant staff was awarded as a professional of the 2012 year

Expert Board of the program “The Professionals of the Year” nominated and awarded as a professional of the 2012 year the best staffs among Ukrainian enterprises on the 21st of December.

Read full article >>

20 December 2012  

National economic rates summary

According to results of economics rates «Exporter of the year» and «Importer of the year», based on Ukrainian State Statistic institution, The Poltava Automobile Unit Plant was awarded by 3rd place in nomination “Means of Surface Transportation, except for railway and tramway rolling stocks” and by 2nd place in the area of of consumer goods. The enterprise was evaluated on such criteria as: total value of export deliveries, overall growth dynamics, diversification, sales geography.

Read full article >>

17 December 2012  

Changes in Top Management of the PJSC “Poltava Automobile Unit Plant”

Herewith we certify that General Director of the PJSC “Poltava Automobile Unit Plant” Roman Chernyak was appointed as a Acting General Director of PJSC “AutoKrAZ”, thereby as an Acting General Director of the PJSC “Poltava Automobile Unit Plant” was appointed Andrian Lytovchenko, previously held the position of a Commercial Director.

Read full article >>

31 October 2012  

Netherlands’ delegation visited PJSC PAAZ

At October 30th a delegation of the perspective partners from Netherlands – representatives of the Style Company headed by the Managing Director Wouter Van Halteren and Executive Director Bastian Clement has visited PAAZ to negotiate terms and conditions of future cooperation in 2013-2014.

Read full article >>

10 October 2012  

Results of joint meeting

On 9th of October was held joint meeting of Board of Poltava Regional branch of USPP, Board of Poltava regional organization of employers (POOR) and Board of Poltava regional association of organizations of employers (POOOR) in expanded membership with the participation of Poltava Customs. Deputy of Poltava Regional State Administration Victor Zhivotenko also participated in the meeting.

Read full article >>

23 August 2012  

ÃVÀÐÄÈß. Rating results

Ukrainian rating program «ÃVÀÐÄÈß» has presented annual project – rating of the most expensive brands in Ukraine «BRANDS GUARD». There are ratings of brands value in more than 30 branches.

Read full article >>

02 August 2012  

Installation of new equipment in the Press Room

Continuing renovation of production base, owing to production and sale growth for the needs of Poltava Automobile Unit Plant, new equipment was provided — Spring-end Grinding Machine DORN G+M DR400/VE (Germany), payback period is 3-5 years.

Read full article >>

22 June 2012  

Installation of new equipment

Continuing renovation of production base, owing to production and sale growth for the needs of Poltava Automobile Unit Plant, new equipment was provided — CNC lathe Style 510 (Netherlands), total value is more than 1,2 million hryvnia (payback period is 3-5 years).



Read full article >>

05 April 2012  

Installation of new equipment in The Tool Room

Continuing renovation of production base, owing to production and sale growth for the needs of The Tool room of Poltava Automobile Unit Plant, new equipment was provided — Electroerosion Die Sinking and Hole Contouring machine EA8, produced by Mitsubishi Corporation, Japan, total value is more than 1,2 million hryvnia (payback period is 3-5 years).

Read full article >>

22 March 2012  

Installation of new equipment in The Tool Room

Continuing renovation of production base, owing to production and sale growth for the needs of The Tool room of Poltava Automobile Unit Plant, new equipment was provided — Vertical Machining Center NSV-102A, produced by YEONG CHIN MACHINERY INDUSTRIES CO. LTD, Taiwan, total value is more than 1,5 million hryvnia (payback period is 3-5 years).

Read full article >>

22 March 2012  

Rolling-stock brake gear devices development

Rolling-stock brake gear devices engineering and design department was adjusting technical documentation and technical requirements for T-bend 573, Hose Connection P17B, Stop Valve 4304ÏÀ, Disconnection Valve 4300ÏÀ with Ukrzaliznytsia Rail Road Car Economy Head Office, Ukrzaliznytsia Standard Department and Rolling-stock Ukrzaliznytsia Planning, Design and Engineering Office.

Read full article >>

16 February 2012  

Ratification of new devices development schedule for the year 2012

Aiming to maximally active respond to the demand of the customers, as well as to keep step with the nowadays brake gear devices market development, Poltava Automobile Unit Plant has planned to put on the production preparation status and in 2012 year on the SIC market number of newly-designed apparatus. A work package is also planned aimed for the modernization of required products, with the growth of customer’s demands and needed technical upgrades of some apparatus.

Read full article >>

11 January 2012  

PAAZ work summary for the year 2011

As a result of enterprise work in the year 2011 OJSC Poltava Automobile Unit Plant has made total amount of sales equal to 125,5 million UAH, including pneumatic gear devices sales on 107,2 million UAH. Growth rate is 125,4% in 2011.

Read full article >>

22 November 2011  

National economic rates summary

According to results of economics rates «Exporter of the year» and «Importer of the year», based on Ukrainian State Statistic institution, The Poltava Automobile Unit Plant was awarded by 29th place among 100 leaders by the total marks in its field of activity in the nomination «Automatic Control Devices and Gears». The enterprise was evaluated on such criteria as: total value of export deliveries, overall growth dynamics, diversification, sales geography.

Read full article >>

16 November 2011  

Installation of new equipment in The Foundry

Continuing renovation of production base, for the needs of The Foundry of Poltava Automobile Unit Plant, new equipment was provided — a vertical Melting electric resistance tilting furnace PTS 970/12 with a programmable controller HT40, produced by «LAC s.r.o.», the Czech Republic. Total value is more than 60 thousands EURO (a pay-off period is 4 years).

Read full article >>

24 October 2011  

National business rates summary

According to information of OJSC «Statinformconsalting», based on data from State’s statistic committee of Ukraine, Poltava automobile unit plant was awarded by one of the leading places, by summary of the marks total, in National business rate in the field of «Production of units, apparatus and devices for vehicles and its engines».

Read full article >>

14 July 2011  

Installation of new equipment in The First Machine-assembly Department

Continuing renovation of production base, owing to production and sale growth for the needs of The First Machine-assembly Department of Poltava Automobile Unit Plant, new equipment was provided — a turret lathe 1V340F30 with NC-31M system, produced by OJSC “Bevers”, Berdichev, Ukraine. Total value is more than 400 thousand hryvnia (payback period is 2 years.

Read full article >>

30 June 2011  

Poltava Automobile Unit Plant is appreciated by TZK GAZ

On May TZK GAZ –one of the largest manufacturers and prime market consumers in the Russian Federation – carried out the production audit of Poltava Automobile Unit Plant.

Read full article >>

15 June 2011  

Installation of new equipment in The First Machine-assembly Department

Continuing renovation of production base, owing to production and sale growth for the needs of The First Machine-assembly Department of Poltava Automobile Unit Plant, new equipment was provided — an injection molding machine DK 3330.F1, produced by OJSC “Termoplastavtomat”, Khmelnitskiy, Ukraine. Total value is more than 180 thousand hryvnia (payback period is 4 years).

Read full article >>

02 June 2011  

Expansion of PAAZ Products into Southern Hemisphere

Special marketing program aimed for promotion of PAAZ products and developed by enterprise leading specialists are proceeding to yield benefits — thanks to installed in first half year package aimed for products promotion, one more Eastern Europe country starts importing PAAZ products.

Read full article >>

17 May 2011  

Installation of new equipment in The Tool Room

Continuing renovation of production base, owing to production and sale growth for the needs of The Tool room of Poltava Automobile Unit Plant, new equipment was provided — Vertical Machining Center NSV-102A, produced by YEONG CHIN MACHINERY INDUSTRIES CO. LTD, Taiwan, total value is more than 1,5 million hryvnia (payback period is 3-5 years), and wire-cutting programmable machine VZ300L, produced by Sodick Technologies Limited, Japan, total value is more than 1,7 million hryvnia (payback period is 3-5 years).

Read full article >>

22 April 2011  

PAAZ Quality Management System Certification

During the first quoter of 2011 certification audit of Quality management system (QMS) was carried out on Poltava automobile units plant. The purpose of the procedure was to borne out correspondence to international standard ISO 9001:2000. Correspondence to international standard means, that achieved by enterprise level of optimization and efficiency of quality management processes in all fields of activity serves as guaranty of production of devices, corresponding to all characteristics to requirements of international standards.

Read full article >>

01 April 2011  

Installation of new equipment in The First Machine-assembly Department

Continuing renovation of production base, owing to production and sale growth for the needs of The First Machine-assembly Department of Poltava Automobile Unit Plant, new equipment was provided — a horizontal programmable machining center MH-500, produced by “FANUC CNC”, Japan. Total value is more than 2 million hryvnia (payback period is 4 years).

Read full article >>

14 March 2011  

PAAZ on wikimapia.org

Today information availability and reliability have a great influence on business activity. That is why, Poltava Automobile Unit Plant as a large-scale and powerful machine-building enterprise in Poltava Region and in Ukraine makes efforts to provide wide range of complete information about its activity to potential partners and community.

Read full article >>

21 February 2011  

Installation of new equipment in The First Machine-assembly Department

Continuing renovation of production base, for the needs of The First Machine-assembly Department of Poltava Automobile Unit Plant, new equipment was provided — a lathe with programmed numerical control, produced by " Jinn FA Machine Industrial Co" LTD, Taiwan. Total value is more than 1,4 million hryvnia.

Read full article >>

14 February 2011  

Ratification of new devices development schedule for the year 2011

Aiming to maximally active respond to the demand of the customers, as well as to keep step with the nowadays brake gear devices market development, Poltava automobile unit plant has planned to put on the production preparation status and in the near future on the SIC market number of newly-designed apparatus. A work package is also planned aimed for the modernization of required products, with the growth of customer’s demands and needed technical upgrades of some apparatus.

Read full article >>

06 February 2011  

Expansion of PAAZ Products into Southern Hemisphere

Special marketing program aimed for promotion of PAAZ products and developed by enterprise leading specialists are proceeding to yield benefits — thanks to installed in first half year package aimed for products promotion, one more Eastern Europe country starts importing PAAZ products.

Read full article >>

10 January 2011  

PAAZ work summary for the year 2010

As a result of enterprise work in the year 2010 OJSC Poltava Automobile Unit Plant has made total amount of sales equal to 101,4 million UAH, including pneumatic gear devices sales on 85,7 million UAH.

Read full article >>

25 December 2010  

Historical museum of PAAZ opening

Before 65th anniversary of PAAZ historical museum was opened. Exposition includes stands, exhibits, photographs, which illustrate enterprises history since December 1st 1945 to our time.

Read full article >>

09 December 2010  

WABCO representatives visited PAAZ

At Desember 7th Poltava Automobile Unit Plant was visited by the head of WABCO representative office in Ukraine, Urij Petrov, and WABCO dealer, Track-Market firm.

Read full article >>

18 November 2010  

Trends of Uzbekistan market entrance

Development of new devices, continuous purposeful renewal of production base, succesful and effective work on existing and perspective markets brings its results. High quality devices manufactured by OJSC "Poltava Automobile Unit Plant" will be going on sale in Uzbekistan.

Read full article >>

28 October 2010  

New devices development

According to approved new devices development schedule in 2010 pre-production models were developed and tested by technical departments’ specialists.

Read full article >>

13 October 2010  

Manufacturing capabilities’ renewal is the key to successful and regular production

SLP-8535 – the contour band saw, which was produced by OJSC “Verstatotechmash”, Ukraine, will be used on the press zone for sticks and pipes cutting for piece billets.

Read full article >>

06 October 2010  

“Kredmash” delegation visited PAAZ

At October 5th Poltava Automobile Unit Plant was visited by “Kredmash” delegation arrived for technical experience exchange and for future cooperation in new technology development process discussion.

Read full article >>

27 September 2010  

Joint project with “Misto” TV studio

The series of video films about Poltava Automobile Unit Plant on “Misto” TV channel has started since September 24.

Read full article >>

06 September 2010  

The improvement of products quality

The under pressure casting technology, which had been applied in Air Drier 11.3536008-10 and Hose Coupling 12.3521010-01 production since august of 2010, permit to do next step in the products quality improvement process, besides providing products’ labour-intensiveness and steel intensity reduction. Naturally, today such characteristics have constructions of recently developed and modified devices.

Read full article >>

21 July 2010  

The Casting equipment repair and renovation

According to renovation of the manufacturing capabilities, reconstruction of the resources and technical basis arrangements was performed thorough repair of the casting under pressure complex OL 38OK on the Poltava Automobile Unit Plant’s foundry.

Read full article >>

13 July 2010  

About construction advantages of modified Four-Circuit Protection Valve 14.3515410

Modified Four-Circuit Protection Valve 14.3515410, developed by the company’s specialists, in now ready for mass production.

Read full article >>

18 June 2010  

National business rates summary

According to information of OJSC "Statinformconsalting", based on data from State’s statistic committee of Ukraine, Poltava automobile unit plant was awarded by one of the leading places, by summary of the marks total, in National business rate in the field of "Production of units, apparatus and devices for vehicles and its engines".

Read full article >>

15 June 2010  

Future Trends of Collaboration with Japanese company "RD Japan Co. Ltd."

In 14th of June with active support and thanks to the Poltava Regional Government a meeting was hold between the representatives of the Japanese company "RD Japan Co. Ltd." and top-management of Poltava’s Region enterprises. Within the framework a presentation of Japanese guests was held and an investment projects of Potlava’s enterprises was presented. Among them an investment project of Poltava Automobile units plant was also displayed.

Read full article >>

08 June 2010  

Installation of new equipment in The First Machine-assembly Department

Continuing renovation of production base, for the needs of The First Machine-assembly Department of Poltava Automobile Unit Plant, new equipment was provided — a vertical processing complex with numerical control DNM-500, produced by "Doosan Infracore CO" LTD, South Korea. Total value is more than 120 thousands US dollars.

Read full article >>

03 June 2010  

Mastering of new devices

As was mentioned earlier, within the framework of the new devices development schedule, PAAZ technical specialists has developed a number of test samples of different apparatus, which for the modern day all has successfully passed all corresponding tests and now is preparing for the serial manufacturing.

Read full article >>

09 April 2010  

Growth of the sales of PAAZ products in Byelorussia

According to work results for first quarter of 2010 year, OJSC PAAZ has reached before crisis level of the sales on Byelorussian market of pneumatic brake gear devices.

Read full article >>

25 March 2010  

New developments by PAAZ

Within the framework of the ratified for the year 2010 new devices development schedule, PAAZ technical specialists already developed first few test samples from the scheduled apparatus list. It’s the 4-circuit Protection Valve of new design 14.3515410, Shock-Absorber of the Driver’s Seat 260-6809100 and Hydro Cylinder.

Read full article >>

05 March 2010  

The Republic of Belarus embassy representatives visited PAAZ

At March 5th a delegation of the Republic of Belarus embassy headed by the First Secretary of the Trade and Economy topics group Mrs. Olga Filimonova has visited PAAZ during full-scale business-trip aimed for gathering information about Ukrainian enterprises for evaluation as possible partners as well as evaluation of reliability and stability of today’s economic ties between two countries.

Read full article >>

02 March 2010  

Ratification of new devices development schedule for the year 2010

Aiming to maximally active respond to the demand of the customers, as well as to keep step with the nowadays brake gear devices market development, Poltava automobile unit plant has planned to put on the production preparation status and in the near future on the SIC market number of newly-designed apparatus.

Read full article >>

22 February 2010  

"ARYA KHODRO (p.j.s.)" company representatives has visited PAAZ

At February 17th a joint delegation of Iranian company "ARYA KHODRO (p.j.s.)" and Foreign Trade Firm "KRAZ" JSC has visited PAAZ during full-scale business-trip aimed for gathering information about Ukrainian enterprises for evaluation as possible partners.

Read full article >>

02 February 2010  

PAAZ Quality Management System Recertified

During the December of 2009 recertification audit of Quality management system (QMS) was carried out on Poltava automobile units plant. The purpose of the procedure was to borne out correspondence to international standard ISO 9001:2000. Correspondence to international standard means, that achieved by enterprise level of optimization and efficiency of quality management processes in all fields of activity serves as guaranty of production of devices, corresponding to all characteristics to requirements of international standards.

Read full article >>

14 January 2010  

PAAZ work summary for the year 2009

As a result of enterprise work in the year 2009 OJSC Poltava Automobile Unit Plant has made total amount of sales equal to 68,2 million UAH, including pneumatic gear devices sales on 55,7 million UAH.

In total value of delivered in the year 2009 export share has come to 76,3%, including brake gear devices — 93,4%. As a result of enterprise work in the year 2009 sales value has increased by 9,2% to Russian Federation, 4,7% to Moldova, by 24,6% to Germany. Delivery value to Hungary has increased more than twice; to Kazakhstan - more than 3 times.

02 December 2009  

General director of PAAZ awarded by The Ministry Cabinet of Ukraine

General director of OJSC "PAAZ" Roman Chernyak was awarded by Premier-minister of Ukraine Julia Timoshenko by diploma for the distinguished achievements in professional activity and personal contribution in reformation national economics, development of business undertakings and market’s infrastructure.

Read full article >>

12 November 2009  

National business rates summary

According to information of OJSC "Statinformconsalting", based on data from State’s statistic committee of Ukraine, Poltava Automobile Unit Plant was awarded by one of the leading places, by summary of the marks total, in National business rate in the field of "Production of units, apparatus and devices for vehicles and engines".

Read full article >>

28 September 2009  

National economic rates summary

According to results of economics rates "Exporter of the year" and "Importer of the year", based on Ukrainian State Statistic institution, The Poltava Automobile Unit Plant was awarded by 8th place in its field of activity. The enterprise were evaluated on such criteria as: total value of production, overall growth dynamics, diversification, sales geography.

08 September 2009  

Installation of new equipment in PAAZ testing laboratory

In September of the year 2009 a brand new thermal vacuum chamber ÒÂV-1000 produced by "MASCHINENFABRIK NEMA", Germany was put into operation in PAAZ testing laboratory. New thermal vacuum chamber ÒÂV-1000 allows to perform tests with an imitation of surrounding conditions in wide temperature range form + 120°Ñ to minus 70°Ñ. Chamber’s payload volume is 1000 dm3, thus allowing to execute climatic tests of all PAAZ apparatus.

Read full article >>

08 September 2009  

PAAZ emerges onto Vietnam’s market of pneumatic brake gear devises

As a result of intensive work of enterprise finest specialists on the September of 8th, a shipment of pneumatic brake gear devises made by PAAZ was carried out for Vietnam. The enterprise "VIETKA MACHINE" Co. LTD has made a buying order for more then 20 thousand of US dollars and makes its move as a leading participant of Vietnam’s market of auto parts as our potential representative in this region. "Intershin" Ltd has strong chances of achieving its goal and built future relationships with PAAZ as our dealer.

Read full article >>

23 July 2009  

PAAZ first shipment of goods to Turkey

23th of July a first shipment of goods to Turkish company Merkez Otomotiv Ltd. (IFN) was executed. Preparations for the collaboration has history for the two years, during which both sides have executed a number of preparations on their enterprises, which allowed to put in action previously planed measures for cross-shipments of components for new pneumatic brake gear devices, developed by Ukrainian and Turkish technical specialists.

Read full article >>

15 July 2009  

New Technology Installation

Continuing renovation of production base, for the needs of Metal casting Department of Poltava Automobile Unit Plant, new equipment was provided — a complex for the die casting mod. OL 308Ê appointed with the horizontal cooler for pressing and control system based on programmed controller "SIEMENS", produced by TEBOWA-MGP, Switzerland. Total value is more than 500 thousands EURO.

Read full article >>

22 June 2009  

Sklifosovsky burial place reconstruction

Potlava region is rightfully proud by its great fellow compatriots — men and women, who bring glory and fame to themselves and place, they lived in. One of them is Nikolai Vasilievich Sklifosovsky — world-wide known surgeon and scientist, who left behind himself legacy, value of which to domestic and world’s medical knowledge is hard to overestimate, even in our modern age.

Read full article >>

27 May 2009  

DIAMON Sp. z. o. o. company representatives has visited PAAZ

At 27 of May a delegation of Polish company DIAMON Sp. z. o. o. has visited Poltava Automobile Unit Plant.

Read full article >>

26 May 2009  

New, upgraded version of hose couplings 11.3521410-01/411-01 has been developed

Poltava Automobile Unit Plant, being the one of traditional and oldest producers of the pneumatic gear devices has always paid much attention for the active respond to the demand of the customers and their needs.

Read full article >>

14 April 2009  

Ratification of new devices development schedule for the year 2009

Aiming to give maximally active respond to the demands of the customers, as well as to keep step with the nowadays brake gear devices market development, Poltava Automobile Unit Plant has planned to put on the production preparation status and in the near future on the SIC market number of newly-designed apparatus.

Read full article >>

30 March 2009  

Nitator AB Company Representatives Visit PAAZ

At March 26th a delegation of Swedish company Nitator AB has visited PAAZ during full-scale business-trip aimed for gathering information about Ukrainian enterprises for evaluation as possible partners.

Read full article >>

18 February 2009  

"Vladimirsky Motor and Tractor Plant" — Future Trends of Collaboration

In February a first delivery of PAAZ products to Vladimirsky motor and tractor plant will be executed.

Read full article >>

10 February 2009  

Scania Representatives Visit PAAZ

At February 9th a delegation of Ukrainian and Polish branches of Scania company has visited Poltava Automobile Unit Plant.

Read full article >>

22 January 2009  

PAAZ Work Summary for the Year 2008

As a result of enterprise work in the year 2008 OJSC Poltava Automobile Unit Plant has increased its sales in 1,1 times compared to year 2007 and correspondingly up to 87,7 million UAH, which is greater than last year result by 3,8 ìèëëèîíîâ ãðèâåí áîëüøå, ÷åì îáúåì ðåàëèçàöèè çà 12 ìåñÿöåâ 2007 ãîäà; â òîì ÷èñëå òîðìîçíîé àïïàðàòóðû - äî 77,2 ìèëëèîíîâ ãðèâåí, ÷òî íà 3,4 million UAH (growth rate to last year — 104,6%).

Read full article >>

18 December 2008  

Turkish Delegation Visited PAAZ

At December 17th Poltava Automobile Unit Plant was visited by its Turkish colleagues — IFN Company representatives, arrived for negotiations of the terms of collaboration for the year 2009.

Read full article >>

19 November 2008  

Kharkov Tractor Plant - Future Trends of Collaboration

The closer and more real becoming future trends of collaboration with the Kharkov tractor plant in the field of supplying PAAZ products for building it on new experimental consignment of KHTZ tractors developed by KHTZ technicians using new technology.

Read full article >>

13 October 2008  

Further Expansion of PAAZ Products into Eastern Europe

Special marketing program aimed for promotion of PAAZ products and developed by enterprise leading specialists are proceeding to yield benefits — thanks to installed in first half year package aimed for products promotion, one more Eastern Europe country starts importing PAAZ products.

Read full article >>

26 September 2008  

National Economic Rates Summary

According to results of economics rates "Exporter of the year" and "Importer of the year", based on Ukrainian State Statistic institution, The Poltava Automobile Unit Plant was awarded by 7th place in its field of activity. The enterprise were evaluated on such criteria as: total value of production, overall growth dynamics, diversification, sales geography.

11 September 2008  

PAAZ Exports to Serbia

According to special marketing program, aimed for promotion of PAAZ products and developed by enterprise leading specialists, one more country starts importing PAAZ products.

Read full article >>

21 July 2008  

Deputy Chairman of Region State Government visited PAAZ

On the 21st of July during the execution of The Evaluation of the capabilities level for the enterprises of Poltava project, Poltava automobile unit plant was visited by Deputy of the Chairman of Region State Government A. Baranov.

Read full article >>

11 July 2008  

New organization department appeared on PAAZ

Starting from 1st of July a new full-flagged organization department appeared on PAAZ — plastic and rubber vulcanization processing department.

Read full article >>

05 June 2008  

Growing sales of PAAZ products in Byelorussia

According to work results for May of 2008, OJSC PAAZ considerably increased share of the sales on Byelorussian market of pneumatic brake gear devices.

Read full article >>

30 May 2008  

Increasing sales of newly designed apparatus

During 2006 - 2007 number of newly designed apparatus were inserted on the devices for completing vehicles and tractors market. These are Back Action Hand Brake Valve with Brake Release Devices 11.3537310, 11.3537410/-10 and Two-Line Trailer Brake Control Valves with Breakage Valve 11.3522008/-10. Despite some of the technological and manufacturing difficulties encountered, all of upper listed devices work up a market of Russia and Byelorussia quite successfully.

Read full article >>

27 May 2008  

Tests of new pneumatic brake gear devices, designed by PAAZ will be carried out on the "Ural Automobile Plant" JSC

Number of new apparatus for pneumatic brake system designed by PAAZ was send to "Ural Automobile Plant" JSC for tests and conclusion of expert's report.

Read full article >>

17 April 2008  

PAAZ enters Azerbaijan’s market of pneumatic brake gear devices

As a result of intensive work of enterprise finest specialists on the April of 17th, in a first time for many years, shipment of pneumatic brake gear devises made by PAAZ was carried out for Azerbaijan Republic. The enterprise "Intershin" Ltd has made a buying order for more then 40 thousand of US dollars and makes its move as a leading participant of Azerbaijan’s market of auto parts as our potential representative in this region. "Intershin" Ltd has strong chances of achieving its goal and built future relationships with PAAZ as our dealer.

Read full article >>

01 April 2008  

The Governor of Poltava region visiting PAAZ

Poltava automobile unit plant were visited during march by the Governor of Poltava region and delegation of members of Potava City Council.

Read full article >>

26 March 2008  

Survey squad of TVRC "ERA" visited PAAZ

Television company "ERA" started new regional project — broadcasting of the new program "Good morning, Ukraine!" in the form of television space bridges from the different parts of our country.

Read full article >>

20 February 2008  

Renovation of machine tooling units in Metal casting and Instrumental Departments

Continuing renovation of production base, Poltava Automobile Unit Plant, according to the terms of accepted for the 2008 year business-plan made investments in purchase of new engineering tools.

Read full article >>

18 January 2008  

PAAZ scheduled a list of new products for 2008

Striving for maximum satisfaction of the needs and requests of our customers and following modern trends on the air brake gear market, Poltava Automobile Unit Plant has scheduled a list of new products to be put into production and start selling in 2008.

Read full article >>

30 November 2007  

Strengthening Positions in Instrumental Department

Continuing renovation of production base, Poltava Automobile Unit Plant purchased vertical mold making machine for its machine tool department, supplied by Haas Automation Inc., USA. Enterprise spend 120 000 EUR for this purchase.

Read full article >>

16 October 2007  

PAAZ Quality Management System Recertified

During the 11-12 of October 2007, recertification audit of Quality Management System (QMS) was carried out at Poltava Automobile Unit Plant. The purpose of the procedure was check correspondence with international standard ISO 9001:2000. which means, that the achieved level of optimization and efficiency of quality management processes in all fields of activity serves as the guarantee of high quality products, corresponding to all characteristics to requirements of international standards.

Read full article >>

10 October 2007  

PAAZ Brake Gear Tested at "GAZ" Plant

Laboratory and field tests of Poltava Automobile Unit Plant's brake gear devices successfully finished at Gorkovsky Automobile Building Plant.

Read full article >>

23 August 2007  

Poltava Automobile Unit Plant received "Best Native Product 2007" Award

On 22-25 of August in National Complex "Expocenter of Ukraine", situated in Kiev, National exhibition "Colors of Ukraine" was carried out. On the 22th of August, on the fist day of the exhibition, ceremony of awarding the winners of National Ukrainian Contest "Best Native Product 2007" was held.

Read full article >>

03 August 2007  

Poltava Automobile Unit Plant awarded for innovations

Continuous growth of activities in all fields, proactive innovation policy of the enterprise top-management and application of arrangements concerning production base, expanding of sales markets and range of goods as well as highly-organized, effective co-work with all of enterprise markets by OJSC "Poltava Automobile Unit Plant" has found confirmation in the results of National Ukrainian rate program "The Innovators Guards 2007".

Read full article >>

02 August 2007  

The strategy of innovation policy, which was chosen by Poltava Automobile Unit Plant for the year 2007, has proven itself by providing stable financial support for the chosen course for innovation and production base upgrade. The investment project designed by the specialists of the enterprise has given the ability to gain more than 500 000 US dollars of credit resources.

Read full article >>

07 June 2007  

Concluding the results of the international project "Transportation System of Ukraine", OJSC "Poltava Automobile Unit Plant" was awarded Gold Medal "For Significant Contribution to Economic Development".

The award was presented by the representatives of Ministry and Ukrainian Industrialist and Entrepreneur Union.

Read full article >>

05 June 2007  

"Product analogues" subsection has been added into "Products" section. There you can find out what products of other producers can be replaced by respective products (analogues) of OJSC "Poltava Automobile Unit Plant".

Go to analogues table >>

01 June 2007  

Relay Valve 11.3518010-20 has been added to "Air Dispensers and Relay Valves" section.

Go to "Air Dispensers and Relay Valves" >>

26 May 2007  

On May 22nd, 2007 our company was visited by representatives of GM Global Purchasing and Supply Chain with the purpose of evaluating the conditions at OJSC "Poltava Automobile Unit Plant" for supplying automobile parts.

Read full article >>

04 May 2007  

Poltava Automobile Unit Plant is at final preparation stage of putting Air Dryer 11.3536008/-10 into mass production.

Pre-production modules are now being tested at AVTOKRAZ Holding Company.

Read full article >>

 

National economic rates summary

According to results of economics rates «Exporter of the year» and «Importer of the year», based on Ukrainian State Statistic institution, The Poltava Automobile Unit Plant was awarded by 3rd place in nomination “Means of Surface Transportation, except for railway and tramway rolling stocks” and by 2nd place in the area of of consumer goods. The enterprise was evaluated on such criteria as: total value of export deliveries, overall growth dynamics, diversification, sales geography.

Read full article >>

 

PAAZ successfully passed international certification audit

The Poltava Automobile Unit Plant has successfully passed the recertification audit of QMS ISO/TS 16949:2009 (certificate of registration ¹ 12 111 46564 IATF 0173324) validity for three years, issued by the certification company TUV SUD Management ServiceGmbH.

Read full article >>

 

PAAZ successfully passed international certification audit

The Poltava Automobile Unit Plant has successfully passed the recertification audit of QMS ISO/TS 16949:2009 (certificate of registration ¹ 12 111 46564 IATF 0173324) validity for three years, issued by the certification company TUV SUD Management ServiceGmbH.

Read full article >>

17 FEB 2007

Our Product Catalogue with prices in US dollars and ordering feature is now available at http://shop.paaz.com.ua/eng/

For more details, click here

17 JAN 2007

New product has been added in "Auxiliary Devices" section:
Pressure Controlling Valve 11.3122110

Go to "Auxiliary Devices"

15 JAN 2007

"Fairs" section is open at our web site. There you can find information about fairs and shows in Ukraine and outside Ukraine where our company is represented.

Go to "Fairs" section.

20 DEC 2006

"History" section is open at our web site. You can read about our company's history here.

22 SEP 2006

English version of our web site is launched.

about news products quality order feedback history fairs contacts