About the benefits of the electro-pneumatic valve (EPV) and the blocks of electro-pneumatic valves (BEPV) production of PJSC «PAUP»
Normally Closed (NC) electro-pneumatic valves (EPV) used to supply compressed air from the pressure source to the actuator motor vehicles, as well as automation and release into the atmosphere when the valve is closed.
Our company according to the results of tests on the car factories and remarks operating organizations held series of design enhancements aimed at improving the reliability of EPV. At present «PAUP» serially produces several versions of single EPV, and EPV blocks that are different from competitors' analogues the presence of a seal between the coil and the housing and upgraded breather. The seal prevents moisture from entering the capillary gap between the coil and the body parts and thereby protects from corrosion. The new design breather has an increased service life and reliably protects from getting into the EPV moisture and foreign bodies. In addition breather it works reliably even in direct contact with jets of water under high pressure, which is used for washing vehicles.
Another positive distinction to EPV production «PAUP» filter is available with an enlarged effective area at the entrance to the product, the design allows the EPV to carry out maintenance of the filter, without disconnecting piping and Disassembling pneumatic scheme of the EPA (except EPC with bottom).
To expand the possibilities of the use of EPV is available with different types of electrical connectors:
- block whip 02-6,3-02 and pin 03-6,3-12 OST 37.003.032-88;
- bayonet DIN72585-A1-2.1-Sn / K1
Return to the NEWS page >>>